Install the overrun clutch
housing thrust bearing assembly (513) into the overdrive carrier assembly
(514). Retain with J 36850
or equivalent.
Install one overdrive
carrier pinion gear (518) and its roller bearings (517) and thrust washers
(515, 516), into the overdrive carrier assembly (514) at the location marked
at disassembly.
Install the overdrive carrier pinion gear pin (519).
Repeat steps 2 and 3 until all four pinion gear assemblies are
installed in their original locations.
Install the overdrive
carrier pinion gear pin retainer (520) on the overdrive carrier assembly (514).
Align the pinion gear pins with the retainer slots.
Install the overdrive carrier pinion gear pin retainer retaining
ring (521) on the overdrive carrier assembly (514).
Install the overdrive
clutch roller assembly (512) into the overdrive carrier assembly (514).