Removal Procedure
- Remove the intake duct
(2). Refer to
Air Cleaner Resonator Outlet Duct Replacement
.
- Disconnect the electrical connector from the mass air flow/intake
air temperature (MAF/IAT) sensor.
- Loosen the 4 fasteners (8) securing the air cleaner housing top
cover (4).
- Lift and rotate the top cover (4) of the air cleaner housing
to gain access to the air filter element.
- Lift out the air filter element (5).
- Inspect the air filter element for dust, dirt, or water. Clean
or replace the air filter element if required.
Installation Procedure
- Install the air filter element (5) into the air cleaner housing.
- Rotate and install the top cover (4) to the air cleaner
housing (6).
- Insert the fasteners (8) to secure the top cover.
- Connect the MAF/IAT electrical
connector.
- Install the intake duct. Refer to
Air Cleaner Resonator Outlet Duct Replacement
.