Step | Action | Yes | No | ||||
---|---|---|---|---|---|---|---|
1 | Did you review the General Description and perform the necessary inspections? | Go to Step 2 | |||||
2 | Verify that the malfunction is present. Does the vehicle operate normally? | System OK | Go to Step 3 | ||||
3 |
Important: A light film of oil on the top portion of the reservoir is normal. Inspect each shock absorber for external fluid leakage. Is the shock absorber leaking? | Go to Step 7 | Go to Step 4 | ||||
4 | Inspect the vehicle trim height. Refer to Trim Height Inspection . Is the vehicle trim height correct? | Go to Step 5 | Go to Step 6 | ||||
5 |
Does the vehicle stop bouncing after 2 cycles? | Go to Step 8 | Go to Step 7 | ||||
6 | Replace the torsion bars or the rear springs. Refer to the following procedures:
Did you complete the repair? | Go to Step 8 | -- | ||||
7 | Replace the shock absorber. Refer to the following procedures:
Did you complete the repair? | Go to Step 8 | -- | ||||
8 | Operate the vehicle in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |