GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Yukon XL - 4WD 🢒 Transmission 🢒 Automatic Transmission - 4L60-E/4L65-E/4L70-E 🢒 Range Selector Lever Cable Bracket Replacement

Removal Procedure

    Object Number: 858985 Size: SH
  1. Apply the park brake.
  2. Shift the transmission into neutral.
  3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  4. Remove the retainer that secures the cable to the bracket.
  5. Depress the tangs and remove the cable from the bracket.

    6. Object Number: 777649 Size: SH
  6. Remove the bolts (1) securing the transmission range selector cable bracket (2) to the transmission.
  7. Remove the transmission range selector cable bracket.

Installation Procedure

    Object Number: 777649 Size: SH
  1. Install the transmission range selector cable bracket.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the transmission range selector cable bracket bolts (1) and tighten to 25 N·m (18 lb ft).

    3. Object Number: 858985 Size: SH
  3. Align and install the cable to the bracket.
  4. Install the retainer that secures the cable to the bracket.
  5. Lower the vehicle.
  6. Check the vehicle for proper operation. If cable adjustment is necessary, refer to Range Selector Lever Cable Adjustment.