Step
| Action
| Value(s)
| Yes
| No
|
DEFINITION:
This diagnostic should only be used if the power seat operates in front and
rear tilt but does not operate front to rear.
|
1
| Has the
Power Seats System Check been performed?
| --
| Go to
Step 2
| Go to
Power Seats System Check
|
2
|
- Connect a fused jumper wire from the appropriate power seat adjuster
switch connector cavity D for CKT 284 (DK GRN) to cavity C
for CKT 150 (BLK).
- Connect a fused jumper wire from cavity E for CKT 285 (TAN)
LH, or, CKT 296 (TAN) RH to cavity F for CKT 540 (ORN).
Did the motor move?
| --
| Go to
Step 3
| Go to
Step 4
|
3
| Replace the power seat adjuster switch.
Is the repair complete?
| --
| Go to
Power Seats System Check
| --
|
4
|
- Check for open(s) in CKT(s) 284 (LT GRN) and 285 (TAN)
LH, or, CKT(s) 284 (LT GRN) and 296 (TAN) RH.
- Repair as necessary. Refer to
Wiring Repairs
in Wiring Systems.
- If no open(s) are found, replace the forward/rearward motor. Refer
to
Front Seat Adjuster Motor Replacement
.
Is the repair complete?
| --
| Go to
Power Seats System Check
| --
|