Caution: NEVER spray water on a hot heat exchanger. The resulting steam could cause personal injury.
Notice: The heat exchanger fins are necessary for good heat transfer. Do not brush the fins. This may cause damage to
the fins, reducing heat transfer.
| • | Inspect the hoses for flexibility and no signs of bulging. |
| • | Inspect the hoses for cracks, cuts, kinks and areas of possible
leaks. |
| • | Inspect the brackets, the supports, the ties and the clamps. |
| • | Replace and adjust as needed. |
Important: Do not brush the radiator fins or spray the radiator with high pressurewater.
The radiator fins are necessary for good heat transfer. Brushing damages the
fins and reduces heat transfer.
Clean the front face of the radiator annually.
| • | Clean the front face of the condenser. |
| • | Remove bugs, leaves, etc. by blowing compressed air through the
radiator. |
| | Blow the air from the rear toward the front. If compressed air is not
available a water hose can be used to force water through the radiator. |
| | Use water only with the engine not running and cool. |
