Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Engine Cooling Diagnostic System Check? | -- | Go to Step 2 | Go to Diagnostic System Check |
2 | Start the engine. Does the ENGINE OVERHEATED message illuminate? | -- | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
3 |
Is the monitored coolant temperature an accurate representation of the engine temperature gauge? | -- | Go to Step 4 | Go to Engine Coolant Temperature Gage Inaccurate or Inoperative in Instrument Panel, Gauges and Console |
4 | With a scan tool select instrument panel cluster, and command the engine overheated message ON and OFF. Does the ENGINE OVERHEATED message turn ON and OFF when commanded? | -- | Go to Engine Overheating | Go to Step 5 |
5 | Replace the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Is the replacement complete? | -- | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
