Removal Procedure
- Apply the parking brake to prevent the vehicle from moving.
- Move the shift lever all the way down (if the transmission is
automatic).
- Tilt the steering wheel to the full down position.
- Pull gently rearward on
the retaining clips holding the bezel to the instrument panel (IP) assembly.
- Remove the bezel.
Installation Procedure
- Position the bezel to
the IP assembly.
- Align the guide pins and the retainers with the holes in the IP
assembly.
- Apply pressure to the bezel in the area of the retainer clips
in order to engage the clips to the IP assembly.
- Tilt the steering wheel to the normal drive position.
- Move the shift lever to the park position (if the transmission
is automatic).
- Disengage the parking brake.