Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Power Door Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 | Check for proper operation of the power door locks. Does the power door lock system operate from the door lock switches? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Does the scan tool display ON? | -- | Go to Step 4 | Go to Step 8 |
4 | Using a test lamp, test for voltage at the door lock relay from the door lock fuse. Does the test lamp illuminate? | -- | Go to Step 6 | Go to Step 5 |
5 | Test for a short to ground in the driver's door lock circuit. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 9 |
6 |
Do the doors lock? | -- | Go to Step 10 | Go to Step 7 |
7 | Repair the open in the door lock relay output circuit. Did you find and correct the condition? | -- | Go to Step 11 | -- |
8 | Repair the short to ground or open in the battery positive voltage circuit between the fuse block and the door lock switches. Did you find and correct the condition? | -- | Go to Step 11 | -- |
9 | Replace the driver's door lock actuator. Did you complete the replacement? | -- | Go to Step 11 | -- |
10 | Replace the door lock relay. Did you complete the replacement? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
