For 1990-2009 cars only
Z Height Measurement
- Lift the front bumper of the vehicle up about 38 mm (1.5 in).
- Remove your hands. Let the vehicle settle.
- Repeat this operation for a total of 3 times.
- For all vehicles, measure from the pivot bolt center line (2) down to the lower corner (5) of the steering knuckle (1) in order to obtain the Z height measurement (4).
- Push the front bumper of the vehicle down about 38 mm (1.5 in).
- Remove your hands.
- Allow the vehicle to rise.
- Repeat the operation for a total of 3 times.
- Measure the Z dimension.
- The true Z dimension number is the average of the high and the low measurements.
| • | For 4WD 15 and 25 series pick ups, the Z measurement should be between 110-122 mm (4.4-4.8 in). |
| • | For all 15 series utility vehicles, the Z measurement should be between 110-122 mm (4.4-4.8 in). |
| • | For 4WD 25 series utility vehicles, the Z measurement should be between 110-122 mm (4.4-4.8 in). |
