Fuel Level Sensor Replacement Except Utility
Removal Procedure
- Remove the fuel sender assembly. Refer to
Fuel Sender Assembly Replacement
.
- Disconnect the fuel pump
electrical connector (5).
- Remove the retaining clip (6) from the fuel level sensor
connector.
- Disconnect the electrical connector (7) from under the
fuel sender cover.
- Remove the sensor retaining clip (4).
- Squeeze the locking tangs and remove the fuel level sensor (3).
Installation Procedure
- Install the fuel level
sensor (3).
- Install the sensor retaining clip (4).
- Connect the electrical connector (7) to the fuel level
sensor.
- Connect the retaining clip (6) to the fuel level sensor
electrical connector.
- Connect the fuel pump electrical connector (5).
- Install the fuel sender assembly. Refer to
Fuel Sender Assembly Replacement
.