The powertrain control module (PCM) sends a state of health message to the EBCM within 5.5 seconds after the modules are powered up. This message is sent via serial data communications.
The ignition is ON.
The EBCM fails to receive serial data from the PCM.
If equipped, the following actions occur:
• | The EBCM disables the TCS. |
• | The traction off indicator turns ON. |
The conditions for setting the DTC are no longer present and you use the scan tool Clear DTCs function.
Step | Action | Yes | No |
---|---|---|---|
1 | Did you perform the ABS Diagnostic System Check? | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications |