Removal Procedure
- Remove the right rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement
in Interior Trim.
- Disconnect the electrical connector from the blower motor processor (1).
- Remove the retaining screws from the blower motor processor (1).
- Remove the blower motor
processor (1) from the HVAC module (2).
Installation Procedure
- Install the blower motor
processor (1) to the HVAC module (2).
- Install the retaining screws to the blower motor processor (1).
- Connect the electrical connector to the blower motor processor (1).
- Install the right rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement
in Interior Trim.