Removal Procedure
- Ensure the seat is in the full upward position.
- Remove the screws retaining
the seat back release handle and the seat recliner handle and remove the handles.
- Remove the remaining screws retaining the trim panel to the seat.
- Remove the trim panel from the seat.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Position the trim panel on the seat.
- Install the screws retaining
the trim panel to the seat.
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the remaining screws retaining the seat back release handle
and the seat recliner handle to the seat.
Tighten
Tighten the screws to 2 N·m (18 lb in).