Removal Procedure
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing
any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to
the vehicle or its components.
- Disconnect
the negative battery cable.
- Remove the instrument panel trim bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
.
- Use a small screwdriver in order to release the CD player retainers.
- Remove the electrical
connectors.
- Remove the CD player.
Installation Procedure
- Connect the electrical
connectors.
- Install the CD player.
- When the CD player is fully seated, snap the unit into the retainers.
- Install the Instrument Panel trim bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
.
- Connect the negative battery cable.
- Verify the component operation.