GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Yukon - 2WD 🢒 Body and Accessories 🢒 Seats 🢒 Rear Bucket Seat Replacement

Removal Procedure

    Object Number: 276319 Size: SH
  1. Remove the front and the rear leg trim covers.

    2. Object Number: 666545 Size: SH
  2. Remove the bucket seat retaining bolts.
  3. Remove the bucket seat from the vehicle.

Installation Procedure

    Object Number: 666545 Size: SH
  1. Install the bucket seat into the vehicle.

    2. Object Number: 276319 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bucket seat retaining bolts.

    3. Tighten
    Tighten the bucket seat retaining bolts to 55 N·m (14 lb ft).

  3. Install the front and the rear leg trim covers.