Rear Seat Armrest Replacement 60/40 - 50/50 Split
Removal Procedure
- Fold the right side of the rear seat forward to gain access to
the armrest trim cover and bolts.
- Remove the armrest trim cover (7).
- Remove the armrest bolts (6).
- Remove the armrest by sliding off the pivot and out.
Installation Procedure
- Install the rear seat armrest to the pivot point on the rear seat.
Notice: Refer to Fastener Notice in the Preface section.
- Install the armrest bolts (6).
Tighten
Tighten the bolts to 9 N·m (80 lb ft).
- Install the armrest trim cover (7) and screws (8).
- Fold the right rear seat back into the upright position.