Removal Procedure
- The sunroof glass panel must be in the closed position.
- Remove the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Remove the sunroof glass panel. Refer to
Sunroof Glass Panel Replacement
.
- Remove the drain channel. Refer to
Roof Drain Channel Replacement
.
- Remove the sunshade. Refer to
Sunroof Sunshade Replacement
.
- Remove the 9 bolts retaining
the module to the roof.
- Remove the module from the vehicle.
Installation Procedure
- Install the module to
the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Loosely install
the 9 bolts retaining the module to the roof .
Use a drill bit to align the 2 holes (6 and 7).
Tighten
Tighten the bolts in the sequence shown to 9 N·m (80 lb in).
- Install the sunshade. Refer to
Sunroof Sunshade Replacement
.
- Install the drain channel. Refer to
Roof Drain Channel Replacement
.
- Install the sunroof glass panel. Refer to
Sunroof Glass Panel Replacement
.
- Install the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Inspect the operation of the sunroof.