Important: The following steps must be completed before using the symptom tables.
• There are no DTCs set. • The control modules can communicate via the serial data link.
• | Inspect for aftermarket devices which could affect the operation of the ESC System. Refer to Checking Aftermarket Accessories in Wiring Systems. |
• | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
• | Inspect the connectors to be properly seated and free of corrosion. |
Faulty electrical connections or wiring may be the cause of intermittent conditions. Check 38 way connector C405 for intermittents. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems.
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom: