Preliminary Procedures

1. Drain the cooling system. Refer to Generator Control Module Cooling System Draining and Filling .
2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
3. Remove the engine shield. Refer to Engine Shield Replacement .
4. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement .
5. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .

1

Generator Control Module Coolant Inlet Hose

Procedure

Using J 38185 reposition the generator control module coolant hose clamps.

Special Tools

J 38185 Hose Clamp Pliers