GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Tools Required

J 29837-A Output Shaft Support Fixture


    Object Number: 154835  Size: SH
  1. Remove the sensor retaining bolt.
  2. Remove the speed sensor and O-ring seal.

  3. Object Number: 13131  Size: SH
  4. Remove the case extension bolts.
  5. Remove the case extension and the case seal.
  6. Remove the output shaft sleeve and the output shaft O-ring seal. Not all models use an output shaft sleeve and O-ring seal.

  7. Object Number: 181572  Size: SH
  8. Install the output shaft support fixture.
  9. If the output shaft support fixture is not used, the output shaft may fall free when the input carrier retaining ring is removed.