Removal Procedure
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing
any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to
the vehicle or its components.
- Disconnect
the negative battery cable.
- Remove the instrument cluster bezel. Refer to
Instrument Cluster Replacement
in Instrument Panel, Gauges
and Console.
- Disconnect the electrical
connectors.
- Unsnap the switch.
Remove the switch.
Installation Procedure
- Install the headlamp switch
and/or the panel dimmer switch to the bezel.
- Connect the electrical connectors.
- Install the bezel to the instrument panel. Refer to
Instrument Cluster Replacement
in Instrument Panel, Gauges
and Console.
- Connect the negative battery cable.