Step | Action | Value(s) | Yes | No | ||||||
---|---|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Interior Lamps System Check? | -- | Go to Step 2 | |||||||
2 | Move the courtesy lamp switch to the ON position. Do all of the lamps light? | -- | Go to Step 4 | Go to Step 3 | ||||||
3 | Do some of the lamps light? | -- | Go to Step 14 | Go to Step 6 | ||||||
4 |
Do all of the lamps light when each door is open? | -- | Go to Step 5 | |||||||
5 | Are the lamps inoperative only when certain doors are open? | -- | Go to Step 15 | Go to Step 8 | ||||||
6 | Using a test lamp, backprobe the front dome lamp connector with a test lamp from CKT 40 (ORN) to ground. Does the test lamp light? | -- | Go to Step 7 | Go to Step 16 | ||||||
7 | Using a J 35616-200 , backprobe the headlamp and panel dimmer switch connector from cavity M to ground. Does the test lamp light? | -- | Go to Step 17 | Go to Step 18 | ||||||
8 |
Does the test lamp light? | -- | Go to Step 11 | Go to Step 9 | ||||||
9 |
Does the test lamp light? | -- | Go to Step 10 | Go to Step 19 | ||||||
10 |
Does the test lamp light? | -- | Go to Step 20 | Go to Step 21 | ||||||
11 | With the interior lamp control module connector disconnected, connect a J 35616-200 from cavity E to ground. Does the test lamp light? | -- | Go to Step 12 | Go to Step 22 | ||||||
12 | Connect a J 35616-200 between the interior lamp control module, cavity C, and ground. Does the test lamp light? | -- | Go to Step 13 | Go to Step 23 | ||||||
13 | Connect a self-powered test lamp between the interior lamp control module, cavity D, and ground. Does the test lamp light? | -- | Go to Step 24 | Go to Step 25 | ||||||
14 |
Did you find and correct a condition? | -- | Go to Step 26 | |||||||
15 |
Did you find and correct a condition? | -- | Go to Step 27 | |||||||
16 | Repair the open in CKT 40 (ORN) between splice S242 and the instrument panel fuse block. Is the repair complete? | -- | -- | |||||||
17 | Repair the open in CKT 156 (WHT) between the headlamp and panel dimmer switch and splice S209. Is the repair complete? | -- | -- | |||||||
18 |
Did you find and correct the condition? | -- | Go to Step 21 | |||||||
19 | Repair the open in CKT 157 (GRY) between the headlamp and panel dimmer switch and the interior lamp control module. Is the repair complete? | -- | -- | |||||||
20 | Repair the open in CKT 150 (BLK) between the headlamp and panel dimmer switch and ground G200. Is the repair complete? | -- | -- | |||||||
21 | Replace the headlamp and panel dimmer switch. Is the repair complete? | -- | -- | |||||||
22 | Repair the open in CKT 156 (BLK) between the interior lamp control module and splice S246. Is the repair complete? | -- | -- | |||||||
23 | Repair the open in CKT 40 (ORN) between the interior lamp control module and splice S248. Is the repair complete? | -- | -- | |||||||
24 | Replace the interior lamp control module. Is the repair complete? | -- | -- | |||||||
25 | Repair the open in CKT 150 (BLK) between the interior lamp control module and ground G202. Is the repair complete? | -- | -- | |||||||
26 | Replace the affected lamp. Is the repair complete? | -- | -- | |||||||
27 | Replace the affected door jamb switch. Is the repair complete? | -- | -- |