Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Front Wiper/Washer System Check? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 4 | Go to Step 3 |
3 | Repair the open in CKT 143 (YEL) between the windshield wiper washer switch and the I/P fuse block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 8 |
5 |
Does the test lamp light? | -- | Go to Step 6 | Go to Step 9 |
6 | Connect a J 35616-200 between windshield wiper motor module connector cavity B and B+. Does the test lamp light? | -- | Go to Step 7 | Go to Step 10 |
7 | Replace the windshield wiper motor module. Refer to Windshield Wiper Motor Replacement . Is the repair complete? | -- | -- | |
8 |
Is the repair complete? | -- | -- | |
9 |
Is the repair complete? | -- | -- | |
10 | Repair open in CKT 150 (BLK) between windshield wiper motor module and ground. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |