SMU - SEC. 4 - FRONT DRIVE AXLE REVISED PROCS. FOR. GMC Truck Yukon

SUBJECT: SERVICE MANUAL UPDATE - SECTION 4 - FRONT DRIVE AXLE REVISED PROCEDURES FOR "DIFFERENTIAL CARRIER ASSEMBLY REPLACEMENT"; "OUTPUT SHAFT, BEARING, AND TUBE REPLACEMENT"; AND "AXLE SHAFT AND SEAL REPLACEMENT"

MODELS: 1995 - 1998 CHEVROLET AND GMC TRUCK C/K MODELS

THIS BULLETIN REVISES PROCEDURES IN SECTION 4 OF THE 1995-98 C/K SERVICE MANUAL FOR THE FOLLOWING AREAS:

- DIFFERENTIAL CARRIER ASSEMBLY REPLACEMENT - OUTPUT SHAFT, BEARING, AND TUBE REPLACEMENT (RIGHT SIDE) - AXLE SHAFT AND SEAL REPLACEMENT

FIGURES: 00 ATTACHMENTS: 07 (ESI BULLETIN)

Object Number: 337038 Size: FS

Object Number: 337040 Size: FS

Object Number: 337042 Size: FS

Object Number: 337044 Size: FS

Object Number: 337046 Size: FS

Object Number: 337048 Size: FS

Object Number: 337050 Size: FS

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.