- Apply an evenly distributed
load to the clutch pack.
- Apply medium pressure.
Tighten
Tighten approximately 89 N·m (20 lb ft),
on the selective backing plate.
- Use feeler gages to check the reverse input clutch plate travel.
- Check the travel between the selective backing plate and the reverse
input clutch retainer ring.
The reverse input clutch plate travel should be 1.02-1.94 mm
(0.040-0.076 in).
- Select the proper selective backing plate to obtain the correct
travel. Refer to Reverse Input Clutch Backing Plate Selection
.