GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Yukon - 4WD 🢒 Body and Accessories 🢒 Interior Trim 🢒 Headlining Rear Trim Panel Replacement

Removal Procedure

    Object Number: 700143 Size: SH

    Important: Do not disconnect the headliner wire harness from the junction block.

  1. Lower the front section of the headliner and suitably support. Refer to Headlining Trim Panel Replacement .
  2. Disconnect the electrical connector.
  3. Remove the rear corner moldings. Refer to Body Rear Corner Garnish Molding Replacement .
  4. Remove the rear upper trim molding. Refer to Rear Upper Garnish Molding Replacement .
  5. Remove the rear coat hook.
  6. Carefully release the headliner from the roof support Velcro® retainers.
  7. Remove the headliner from the vehicle.

Installation Procedure

    Object Number: 700143 Size: SH
  1. Install the rear section of the headliner to the vehicle.
  2. Secure the headliner to the roof support Velcro® retainers.
  3. Connect the electrical connector.
  4. Install the rear coat hook.
  5. Install the rear upper trim molding. Refer to Rear Upper Garnish Molding Replacement .
  6. Install the rear corner molding. Refer to Body Rear Corner Garnish Molding Replacement .
  7. Install the front section of the headliner. Refer to Headlining Trim Panel Replacement .