Rear License Plate Lamp Replacement W/ Step Bumper

1. Ensure the headlamp switch is in the OFF position.



2. Remove the lens from the lamp assembly.
3. Remove the bulb.

1. Install the bulb.
2. Install the lens to the lamp assembly.
3. Inspect the operation.

Rear License Plate Lamp Replacement Escalade EXT

1. Remove the rear liscense plate attaching hardware from the rear bumper.
2. Remove the spare tire wheel hoist guide and retaining clip. Refer to Spare Wheel Hoist Replacement .
3. Remove the top fascia step pads. Refer to Rear Bumper Step Pad Replacement .
4. Remove the center fascia step pads. Refer to Rear Bumper Step Center Pad Replacement .
5. Remove the rear object sensors. Refer to Rear Object Sensor Replacement .



6. Remove the rear fascia from the bumper bar.



7. Release the lamp assembly tab from the rear fascia to remove.
8. Release the lamp socket by turning ¼ turn counterclockwise.
9. Remove the lamp assembly from the vehicle.

1. Install the lamp assembly to the vehicle.
2. Install the lamp socket and turn ¼ turn clockwise.
3. Press the lamp firmly to attach.



4. Install the rear ascia to the bumper bar.
5. Install the rear object sensor. Refer to Rear Object Sensor Replacement .
6. Install the center fascia step pad. Refer to Rear Bumper Step Center Pad Replacement .
7. Install the top fascia step pads. Refer to Rear Bumper Step Pad Replacement .
8. Install the spare tire wheel hoist guide and retaining clip. Refer to Spare Wheel Hoist Replacement .
9. Install the rear liscense plate attaching hardware and liscence plate..