GM Service Manual Online
For 1990-2009 cars only

Cargo Box Bridge Side Inner Panel Replacement Avalanche/EXT

Removal Procedure

  1. Remove the rear compartment cover assembly.
  2. Remove the panel - cargo box bridge center. Refer to Cargo Box Bridge Cross Bar Replacement .

  3. Object Number: 741566  Size: SH
  4. Remove the retaining screws (1) from the side inner panel.
  5. Remove the side inner panel from the vehicle.

Installation Procedure


    Object Number: 741566  Size: SH
  1. Install the inner side panel to the vehicle.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the retaining screws (1) to the inner side panel.
  4. Tighten
    Tighten the inner side panel screws to 7 N·m (62 lb in).

  5. Install the panel - cargo box bridge center. Refer to Cargo Box Bridge Cross Bar Replacement .
  6. Install the rear compartment cover assembly.