Brace Replacement - Front Bumper Avalanche

1. Remove the brace bolt (2) from the front bumper fascia.
2. Remove the brace bolt (3) from the outboard mounting brace plate.
3. Remove the brace (1) from the vehicle.

1. Install the brace (1) to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the 2 bolts that retain the brace to the fascia and the outboard brace plate.

Tighten

•	Tighten the front bumper fascia brace bolt (2) to 15 N·m (11 lb ft).

•	Tighten the front bumper outboard brace plate bolt (3) to 9 N·m (80 lb in).