Tools Required

1. Using the J 25016 , install the oil seal assembly (243).



2. Install the front helix retainer (244).



3. Install an O-ring seal (202) and oil seal ring (201) into the groove on the back side of the pump slide (203).
4. Use J 36850 , or an equivalent, to retain the seal and the ring on the slide.
5. Install the pivot pin spring (204) and the pivot pin (205).
6. Install the pump slide (203).
7. Index the slide notch with the pivot pin (205).

The oil seal ring must face downward into the pump pocket.

8. Install the pump slide seal support (208) and the pump slide seal (209).



9. Install the pump slide inner (207) and outer (206) springs, some models will use only one fluid pump slide outer spring (245).



10. Install the bottom pump vane ring (210) and the rotor guide (211) into the rotor (212) and retain with J 36850 or an equivalent.
11. Install the rotor (212) with the rotor guide (211) toward the pump pocket.
12. Install the pump vanes (213).
13. Install the top pump vane ring (210).