Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Driver Seat Schematics and Passenger Seat Schematics Connector End View Reference: Power Seat Connector End Views | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
2 | Operate the heated seat system. Does the system operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the scan tool display the Heated Seat Status parameter as Off? | Go to Step 6 | Go to Step 4 |
4 | Display the Heated Seat Mode parameter in the door module Inputs data list. Does the scan tool display the Heated Seat Mode parameter as OFF? | Go to Step 6 | Go to Step 5 |
5 |
Does the scan tool display the Heated Seat Mode parameter as OFF? | Go to Step 7 | Go to Step 8 |
6 | Replace the driver seat module. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming. Is the repair complete? | Go to Step 9 | -- |
7 | Replace the heated seat switch. Refer to Front Seat Heater Switch Replacement . Is the repair complete? | Go to Step 9 | -- |
8 | Replace the door module. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming. Is the repair complete? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |