Load Floor Front Trim Panel Replacement Avalanche

1. Remove the rear compartment cover assembly.
2. Remove the load floor mat from the vehicle.



3. Pull up on the grate panel in order to remove.
4. Remove the bolts from the panel assembly - load floor trim.
5. Remove the panel from the vehicle.

1. Install the panel assembly - load floor to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the retaining bolts to the load floor trim panel.

Tighten
Tighten the bolts to 4 N·m (35 lb in).

3. Install the load floor mat to the vehicle.
4. Install the rear compartment cover assembly to the vehicle.