Cupholder Replacement Non-Luxury

1. Grab the middle of the cup holder firmly and pull outwards to release the clips (1).
2. Remove the cup holder from the console.

1. Install the cup holder by pushing inwards till the clips (1) click in place.
2. Ensure around the corners of the cup holder is seated properly.

Cupholder Replacement Luxury

1. Remove the upper trim bezel from the center console. Refer to Floor Console Bezel Replacement .
2. Remove the remote CD player if equipped. Refer to Remote Compact Disc Player Replacement in Entertainment.



3. Insert a flat bladed tool between the console and cupholder assembly.
4. Remove the cupholder assembly by prying the cupholder to release the clips (2).
5. Remove the wire connector for the cupholder.
6. Remove the cupholder from the console.

1. Place the cupholder assembly over the console.
2. Connect the wire connector to the cupholder assembly.
3. Push on the corners of the cupholder assembly till all the retaining clips (2) are seated.
4. Install the remote CD player if equipped. Refer to Remote Compact Disc Player Replacement in Entertainment.
5. Install the upper trim bezel. Refer to Floor Console Bezel Replacement .

Cupholder Replacement Rear

1. Lower the cupholder.
2. Insert a flat bladed tool between the cupholder hinge and the end panel.
3. Pry off the cupholder from the console.

1. Install one of the hinge in the opening in the panel.
2. Swing the cupholder assembly so that the other hinge can be installed in the other opening.
3. Inspect for correct operation.