Cupholder Replacement Non-Luxury
Removal Procedure
- Grab the middle of the cup holder firmly
and pull outwards to release the clips (1).
- Remove the cup holder from the console.
Installation Procedure
- Install the cup holder by pushing inwards
till the clips (1) click in place.
- Ensure around the corners of the cup holder is seated properly.
Cupholder Replacement Luxury
Removal Procedure
- Remove the upper trim bezel from the center console. Refer to
Floor Console Bezel Replacement
.
- Remove the remote CD player if equipped. Refer to
Remote Compact Disc Player Replacement
in Entertainment.
- Insert a flat bladed tool between the console
and cupholder assembly.
- Remove the cupholder assembly by prying the cupholder to release the clips
(2).
- Remove the wire connector for the cupholder.
- Remove the cupholder from the console.
Installation Procedure
- Place the cupholder assembly over the console.
- Connect the wire connector to the cupholder assembly.
- Push on the corners of the cupholder assembly till all the retaining
clips (2) are seated.
- Install the remote CD player if equipped. Refer to
Remote Compact Disc Player Replacement
in Entertainment.
- Install the upper trim bezel. Refer to
Floor Console Bezel Replacement
.
Cupholder Replacement Rear
Removal Procedure
- Lower the cupholder.
- Insert a flat bladed tool between the cupholder hinge and the end panel.
- Pry off the cupholder from the console.
Installation Procedure
- Install one of the hinge in the opening in the
panel.
- Swing the cupholder assembly so that the other hinge can be installed
in the other opening.
- Inspect for correct operation.