Caution: Refer to Brake Dust Caution in the Preface section.
4.1. | Compress the spring (3) by pushing towards the lever (1). |
4.2. | Depress the locking tabs. |
4.3. | Pull the cable housing out of the backing plate (4). |
4.4. | Remove the cable (2) through the slot in the backing plate. |
10.1. | Compress the spring (3) by pushing towards the lever (1). |
10.2. | Route the cable (2) through the slot in the backing plate. |
10.3. | Push the cable housing into the backing plate (4) until the locking tabs snap into place. |