GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2006
🢒
Yukon - 4WD
🢒
Brakes
🢒
Park Brake
🢒 Parking Brake Front Cable Replacement
Removal Procedure
Release the park brake.
Remove the park brake pedal. Refer to
Parking Brake Lever Pedal Assembly Replacement
.
Roll the carpet back to access cable grommet.
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
Disengage the grommet and the cable from the floor pan.
Disconnect the front cable from the intermediate cable.
Remove the cable from the body mount by depressing the retaining tabs.
Remove the cable.
Installation Procedure
Install the cable.
Snap the retainer tabs into the body mount.
Connect the front cable to the intermediate cable.
Route the cable in through the floor pan and engage the grommet.
Remove the safety stands.
Lower the vehicle.
Roll the carpet into place.
Install the park brake pedal. Refer to
Parking Brake Lever Pedal Assembly Replacement
.
Adjust the park brake system. Refer to
Park Brake Adjustment
.