Disassembly Procedure
- Rotate the stub shaft
back and forth to drain the fluid.
- Insert a punch into the housing access hole to unseat the retaining
ring (1).
- Remove the plug (2).
- Remove the O-ring seal (3).
Assembly Procedure
- Lubricate the O-ring seal (3)
with power steering fluid.
- Install the O-ring seal (3) into the steering gear housing (5).
- Install the plug (2).
- Install the retaining ring (1). Ensure that the retaining
ring open end is approximately 25 mm (1 in) from the access
hole in the steering gear housing (5).