Rearview Camera Replacement. GMC Truck Yukon

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2008 🢒 Yukon - 4WD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rearview Camera Replacement

Rearview Camera Replacement Liftgate

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the rear liftgate applique. Refer to Liftgate Center Applique Replacement .
1	Rear Object Camera Screws Tighten 2 N·m (18 lb in)
2	Rear Object Camera Tip Disconnect the electrical connector.

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Remove the rear liftgate applique. Refer to Liftgate Center Applique Replacement .

Rear Object Camera Screws

Tighten
2 N·m (18 lb in)

Rear Object Camera

Tip
Disconnect the electrical connector.

Callout	Component Name
Preliminary Procedure Remove the endgate trim panel. Refer to Endgate Trim Panel Replacement .
1	Rear Object Camera Nuts Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
2	Rear Object Camera Tip Disconnect the electrical connector.