GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Yukon - 4WD 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Cargo Box Stowage Box Replacement

Removal Procedure

  1. Remove the rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
  2. Remove the assist handle. Refer to Endgate Assist Handle Replacement .
  3. Remove the cargo box stowage lid assembly. Refer to Cargo Box Stowage Box Lid Replacement .

    4. Object Number: 1708945 Size: SH
  4. Remove the lamp socket from the pickup box side courtesy lamp.
  5. Remove the cargo tie-down bolts and tie rings from the body side inner panel.
  6. Remove the cargo box stowage box (2) from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1708945 Size: SH
  1. Install the cargo box stowage box (2) to the vehicle.

    2. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  2. Install the cargo tie-down rings and bolts to the body side inner panel.

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  3. Install the cargo box stowage lid assembly. Refer to Cargo Box Stowage Box Lid Replacement .
  4. Install the lamp socket to the pickup box side courtesy lamp assembly.
  5. Install the assist handle. Refer to Endgate Assist Handle Replacement .
  6. Install the rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .