Preliminary Procedure

Remove the front tire/wheel. Refer to Tire and Wheel Removal and Installation.

1

Steering Linkage Outer Tie Rod Nut

Notice: Refer to Fastener Notice in the Preface section.

Tighten
60 N·m (44 lb ft)

2

Steering Linkage Inner Tie Rod Nut

Tighten
75 N·m (55 lb ft)

3

Steering Linkage Outer Tie Rod

Procedure

1. Use puller J 24319-B to separate the steering linkage outer tie rod from the steering knuckle.
2. Inspect the steering linkage inner tie rod for bent or damaged threads.
3. Clean the tapered surface of the steering knuckle.
4. Lubricate the steering linkage inner tie rod threads with chassis lubricant. Refer to Fluid and Lubricant Recommendations.
5. Adjust the front toe. Refer to Front Toe Adjustment.

Special Tools

J 24319-B Steering Linkage and Tie Rod Puller