GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Yukon - 4WD 🢒 Preface 🢒 Cautions and Notices 🢒 Drive Belt Tensioner Replacement - Accessory

Removal Procedure

    Object Number: 1696654 Size: SH
  1. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory.
  2. Remove the drive belt tensioner bolts.
  3. Remove the drive belt tensioner.

Installation Procedure

    Object Number: 1696654 Size: SH
  1. Position the drive belt tensioner to the water pump.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install and tighten the drive belt tensioner bolts.

    3. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  3. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory.