Intake Manifold Removal L57, L65

1. Remove the fuel manager/filter assembly retaining bolts.



2. Loosen the fuel hose clamps at the fuel filter assembly.
3. Remove the fuel hoses from the fuel filter assembly.
4. Disconnect the fuel manager/filter electrical connector.



5. Remove the fuel filter assembly.



6. Disconnect the glow plug relay electrical connectors.



7. Remove the glow plug relay retaining nuts.
8. Remove the glow plug relay.



9. Disconnect the vacuum harness hose connectors.
10. Remove the vacuum harness.
11. Remove the vacuum solenoid retaining bolt(s) (2).
12. Remove the vacuum solenoid(s) (1).



13. Remove the vacuum solenoid mounting bracket retaining nuts.
14. Remove the vacuum solenoid mounting bracket.



15. Remove the turbocharger oil feed line mounting bracket retaining nut.
16. Remove the turbocharger oil feed line mounting bracket. Gently pull the bracket from the turbocharger oil feed line at a 45 degree angle to separate.



17. Remove the intake manifold bolts.
18. Remove the intake manifold.
19. Remove the gaskets.

Intake Manifold Removal L65-CMT

1. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
2. Remove the IAT sensor.



3. Disconnect the Manifold Absolute Pressure (MAP) sensor electrical connector.
4. Remove the MAP sensor retaining bolts.
5. Remove the MAP sensor.
6. Remove the gasket.



7. Disconnect the glow plug relay electrical connectors.



8. Remove the glow plug relay retaining nuts.
9. Remove the glow plug relay.



10. Disconnect the vacuum harness hose connectors.
11. Remove the vacuum harness.
12. Remove the vacuum solenoid retaining bolt(s).



13. Remove the vacuum solenoid(s).
14. Remove the vacuum solenoid mounting bracket retaining nuts.
15. Remove the vacuum solenoid mounting bracket.



16. Remove the upper intake manifold retaining bolts.
17. Remove the upper intake manifold.
18. Remove the O-ring from the upper intake manifold.
19. Remove the gaskets.



20. Loosen the Crankcase Depression Regulator (CDR) valve vent hose clamp at the CDR valve.
21. Remove the CDR valve vent hose from the CDR valve.
22. Remove the CDR valve vent hose clamp from the CDR valve vent hose.
23. Remove the CDR valve from the valve rocker arm cover. Pull upwards while twisting/rocking CDR valve.
24. Remove the fuel injection feed pipe mounting bracket retaining nuts.
25. Remove the fuel injection feed pipe mounting brackets.
26. Remove the fuel injection feed pipes.



27. Remove the intake manifold bolts.
28. Remove the intake manifolds.
29. Remove the gaskets.

Intake Manifold Removal L65

1. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
2. Remove the IAT sensor.



3. Disconnect the Manifold Absolute Pressure (MAP) sensor electrical connector.
4. Remove the MAP sensor retaining bolts.
5. Remove the MAP sensor.
6. Remove the gasket.



7. Remove the turbocharger short brace retaining bolts.
8. Remove the turbocharger short brace.
9. Remove the turbocharger long brace retaining bolt.
10. Remove the turbocharger long brace retaining nut.
11. Remove the turbocharger long brace.



12. Loosen the turbocharger connection hose clamps.
13. Loosen the turbocharger connection hose.

13.1.

Insert a small flat screwdriver blade between the turbocharger connection hose and the turbocharger and slide the screwdriver blade along the surface of the turbocharger until the hose twists freely.

13.2.

Insert a small flat screwdriver blade between the turbocharger connection hose and the upper intake manifold and slide the screwdriver blade along the surface of the upper intake manifold until the hose twists freely.




14. Remove the upper intake manifold retaining bolts.
15. Remove the upper intake manifold.
16. Remove the gasket.
17. Remove the intake manifold.

Intake Manifold Removal Upper-L56

1. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
2. Remove the IAT sensor.



3. Disconnect the Manifold Absolute Pressure (MAP) sensor electrical connector.
4. Remove the MAP sensor retaining bolts.
5. Remove the MAP sensor.
6. Remove the gasket.



7. Remove the turbocharger short brace retaining bolts.
8. Remove the turbocharger short brace.
9. Remove the turbocharger long brace retaining bolt.
10. Remove the turbocharger long brace retaining nut.
11. Remove the turbocharger long brace.



12. Loosen the turbocharger connection hose clamps.
13. Loosen the turbocharger connection hose.

13.1.

Insert a small flat screwdriver blade between the turbocharger connection hose and the turbocharger and slide the screwdriver blade along the surface of the turbocharger until the hose twists freely.

13.2.

Insert a small flat screwdriver blade between the turbocharger connection hose and the upper intake manifold and slide the screwdriver blade along the surface of the upper intake manifold until the hose twists freely.




14. Remove the upper intake manifold retaining bolts.
15. Remove the EGR valve.
16. Remove the gasket.
17. Remove the upper intake manifold.
18. Remove the gaskets. The EGR tower gasket is located on the round center portion of the intake manifold.