Tools Required
| • | J 26958 Output
Shaft Aligning & Loading Tool |
Important: The J 26958
and J 26958-10B
should still be in
position from the Reaction Sun Gear to Input Drum End Play Check procedure.
- Set theJ 8001
dial
indicator so that the pointer is at zero.
- Use J 28585
and
carefully pry up on the reaction internal gear (668).
- The J 8001
dial
indicator should read 0.08-1.17 mm (0.003-0.046 in).
- In order to select the correct selective spacer for the low roller
clutch race, refer to the reverse clutch housing to low race selective spacer
table in
End Play Specifications
.
- Remove the J 8001
and the J 28588
.
