Notice: Use J 36850 or equivalent during assembly in order to retain
checkballs or to lubricate components. Lubricants other than the recommended
assembly lube changes the transmission fluid characteristics and
causes undesirable shift conditions or filter clogging.
Important:: When assembling the transmission, do not use any O-ring, gaskets or
seals that have been removed.
Inspect the case (101) for the following:
| • | Case to control valve body face for damage |
| • | Interconnected fluid passages for damage |
| • | All bolt holes for thread damage, use a Heli-coil® to repair |
| • | Cooler connectors for proper torque, 38 N·m (28 lb ft) |
| • | Ring grooves for damage |
| • | Clutch plate lug for wear or damage |
| • | Band retaining pins for good retention |
| • | Detent valve bore for scoring or scratches |
| • | Modulator valve bore for scoring or scratches |
