For 1990-2009 cars only
- Remove the ignition coil and bracket assembly and bolts from the rocker cover, if required.
- Remove the ignition coils and bolts from the bracket, if required.
- Inspect the tube for a loose fit or damage.
- Remove the oil fill cap and tube from the right cover, if required.
- Remove the gaskets (1) from the covers.
- Remove the cover mounting bolts, with grommets.
- Clean the covers and coil brackets in solvent.
- Dry the components with compressed air.
- Inspect the ventilation system passages for restrictions.
- Inspect the gasket grooves for damage.
- Inspect the coil bracket threaded bolt holes for damaged threads or debris.
- Inspect the coil mounting brackets for cracking, stripped bolt hole threads, or other damage.
- Inspect the ignition coils for exterior damage and bent or broken connector pins.
Important:
| • | Do not use the valve rocker arm cover gasket again. Install a NEW gasket during assembly. |
| • | Remove the ignition coils from the bracket before cleaning the bracket in solvent. Do not submerge the ignition coils in solvent. |
| • | Do not remove the oil fill tube from the cover unless service is required. |
| • | If the oil fill tube has been removed from the rocker arm cover, install a NEW tube during assembly. |
Cover mounting bolts and grommets that are not damaged may be used again during assembly.
Caution: Wear safety glasses in order to avoid eye damage.
