Oil Level Indicator and Tube Installation L65-CMT

1. Install a new o-ring seal to the oil level indicator tube.



2. Install the oil level indicator tube to the engine.
3. Install the oil level indicator tube bracket bolt.

Tighten
Tighten the bolt to 4 N·m (35 lb in).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Oil Level Indicator and Tube Installation gmt800

1. Install a new O-ring seal to the oil level indicator tube.

Install the oil level indicator tube.

2. Install the oil level indicator tube retaining bolt.

Tighten
Tighten the bolt to 4 N·m (35 lb in).

3. Install the oil level indicator tube retaining clip.