Transmission Case
- Clean the transmission case in a suitable solvent. Air dry the transmission
case.
- Clean all sealant material from retainer bolt threads.
- Inspect the transmission case for the following conditions:
| 3.5. | Nicked mounting surfaces |
| 3.6. | Damaged sealing surfaces |
| 3.7. | Damaged front or rear bearing bores |
- Inspect the machined mating surfaces for flatness with a straight
edge.
- Inspect the bearing races and bores for wear, scratches or grooves.
- Inspect the bushing for excessive wear.
- Use a fine mill file to dress minor scratches or burrs.
- If scratches, or grooves or scoring cannot be removed by hand
with a soft stone or crocus cloth, replace the component.
- Clean up damaged threads with the correct size tap.
- Replace a cracked housing.
- Replace worn bushings.
Adapter Plate
- Clean the adapter plate
parts with a suitable solvent. Air dry all the parts.
- Inspect the adapter plate parts for the following conditions:
(replace a cracked adapter plate.)
| 2.4. | Nicked mounting surfaces |
| 2.5. | Damaged sealing surfaces |
| 2.6. | Damaged front or rear bearing bores |
- Inspect the machined mating surfaces for flatness. Check the mating
surfaces with a straight edge.
- Inspect the bearing races and bores for wear, scratches or grooves.
- Inspect the bushing for excessive wear. Replace worn bushings.
- Use a fine mill file to dress minor scratches or burrs.
- If scratches, or grooves or scoring cannot be removed by hand
with a soft stone or crocus cloth, replace the component.
