Dash Integration Module Replacement Model

Important: Before replacement of the DIM module (1), record the personalization settings in order to transfer the settings after the DIM module (1) has been replaced.

1. Remove the right sound insulator. Refer to Closeout/Insulator Panel Replacement -- Right in Instrument Panel Gauges, and Console.
2. Disconnect the DIM module electrical connectors (2).



3. Depress inward on the locking tab (2).
4. With the locking tab (2) depressed, slide the DIM module (2) downward.
5. Remove the DIM module (1) from the bracket.

1. Install the DIM module to the bracket.
2. Slide the DIM module upward until the DIM module and the locking tab are fully engaged.



3. Connect the DIM module electrical connectors (2).
4. Install the right sound insulator. Refer to Closeout/Insulator Panel Replacement -- Right in Instrument Panel Gauges, and Console.
5. Reprogram the DIM module (1). Refer to BCM Programming/RPO Configuration.