Instrument Panel Module Replacement Model

1. Remove the sound insulator. Refer to Closeout/Insulator Panel Replacement in Instrument Panel, Gauges and Console.
2. Remove the fastener from the instrument panel module (IPM).
3. Rotate the IPM up and off of the mag beam.
4. Disconnect the electrical connectors from the IPM.
5. Remove the IPM from the vehicle.

1. Install the instrument panel module (IPM) to the vehicle.
2. Connect the electrical connectors to the IPM.
3. Install the IPM to the mag beam by inserting the top tab of the module into the slot on the mag beam and rotating down.
4. Install the fastener.
5. Install the sound insulator. Refer to Closeout/Insulator Panel Replacement in Instrument Panel, Gauges and Console.